How to Install TWRP Recovery on Huawei GR3 2017 EMUI 5.0 | TWRP for Huawei GR3 2017 – Howtoshtab – how to, lifehacks, tips and tricks

hey what’s up guys this is mizan welcome back to my another video in this video I’m going to show you how to install custom TWRP recovery on your Huawei GR3 2017 device that has run EMUI 5.0 and it’s Android version is Nougat 7.0 so let’s get started our work so at first you need to download these files I put these files down the link in my video description just to go to this link and download all of these files after that just extract this adb setup using 7-zip or WinRAR and just set up these files so I have already set up these adb files so just follow this instruction here and after that extract this adb fastboot tools and make sure you have install your HiSuit here it is so after all just copy this file into this folder or move this file into this ata fastboot tools then double click on ADB exe then rename this file to TWRP so now we have done here so before we are going to the flash process make sure you have unlock your bootloader and make sure you have enable USB debugging by going to developer settings so if you don’t have the developer settings just go to settings and go to about phone and heat the build number more than seven times so you got that developer options so after that just press back and go to developer options and just enable USB debugging so after all just connect your phone through the USB cable so first time it will ask this one allow access to device data just press yes allow access so when you enable USB debugging and connect your device through the USB cable it will ask a ll permission so just allow this one so after that we have done here now just piss shift right click on this mouse and click open command window here and you can see a black window is come up so now we are going to take our devices attached or not just type a command adb devices and hit enter so it will take some times so if you just show this your device serial number here so you have a ready to flash it so if you don’t show this serial number at this stage make sure you have installed your proper driver also this ADB drivers and enable USB debugging so now we have ready to flash it so just type another command adb reboot bootloader and hit enter so your device go into that download mode now you can see my devices go to the fastboot and rescue mode mode so now we need to check again to the fastboot is work or not just type a commands fastboot devices and hit enter so you can see again it will show the serial number so it means the fastboot is now work properly so now we need to type another command to flash this custom TWRP just type a command adb sorry fastboot flash recovery twrp.

img and hit enter so it will take almost 1.2 second and flash that custom TWRP recovery so now we have done here so just type another power and fastboot reboot and your device go into the system so now you can see my device is reboot to the system normally so now we are going to check all recovery it is work properly or not so just type a command adb reboot recovery and hit enter so it will take some times and your device boot into the recording mode automatically or you can just use this method manually just shut down your phone and press the power button and volume up button and hold it that key for 15 seconds 10 to 15 seconds so it will go into the team win recovery project so some time it will not work so that’s why i am not use this method I am like to using these comments to go to the recovery mode so you can see my TWRP is work fine so first time it will ask if permission so just swipe it to confirm it so so that’s it for today hope you enjoying this video if you feel this video is helpful for you give me a thumbs up and don’t forget to subscribe my channel see you on the next video take care bye bye.

You may also like